How to Setup and Control Amazon Fire TV with Alexa



How to Control Amazon Fire TV with Alexa


Link Your Devices 

  • From the Amazon Fire TV go to Menu and select Music, Video, & Books.
  • Select Fire TV
  • Select Link Your Alexa Device then follow the on-screen instructions to select your device
  • Finally select Link Devices to confirm the device pairing.

You can link multiple Alexa devices to the same Fire TV, but each Alexa device can only be used to control a single Fire TV. To link your Alexa and Fire TV devices they need to be on the same Amazon account to work correctly.

Comments

Post a Comment

Popular posts from this blog

How to Wire Crestron Cresnet Connections

Image
To wire Crestron Cresnet properly you are suggested to use Crestron's standard Cresnet cabling which consists of 4 conductors to operate correctly. You will need a small flat head screw driver called a tweeker to unscrew the 4 small screws of the green phoenix connector to be able to insert your stripped back wire ends.  The Red wire is for the power of the Cresnet communication bus which is 24VAC.  The White wire is the Y communication of the RS-485 bus which is the positive side of communication pair.  The Blue wire is the Z communication of the RS-485 bus and this is the negative side of the bus pair.  Finally the Black wire is the ground side of the power pair to complete the Cresnet connections and wiring.  Once the wires are inserted into the Pheonix connector you will use your tweeker screw driver to fasten the wire to the phoenix connector as seen below in the picture to be able to connect whichever device you are hooking up....
Keep reading

How to Control NVIDIA Shield with IR (Infrared)

Image
When attempting to control and integrate an NVIDIA Shield with the use of a universal control you will need the help from the Flirc USB Dongle to accomplish the task which is readily available on Amazon's Online Store .  When setting up the Flirc adapter you are able to configure the USB dongle and learn the IR codes that you would like to use to control your NVIDIA Shield with the downloadable Flirc configuration software. The Flirc dongle and software together learn the IR codes from any remote and allow them to control the functions of the NVIDIA Shield which are set one at a time.  Once the setup has been completed with all the IR codes learned into the Flirc adapter you finalize the configuration and the dongle is ready to be plugged into the NVIDIA Shield in an open usb port. Essentially now you have an IR receiver located off the usb port for you to use as you wish. The Flirc USB dongle also is compatible in controlling...
Keep reading

How to Control Amazon Fire TV with IR (Infrared)

Image
When attempting to control and integrate the Amazon Fire TV with the use of a universal control you will need the help from the Flirc USB Dongle to accomplish the task which is readily available on Amazon's Online Store .  The Amazon Fire TV comes with a Bluetooth remote which is great if you do not have an involved TV setup and would like to hide the Fire TV away out of viewing site but it does not help if you are trying to have one system and remote control to work all your devices seamlessly. This is where integrating the Fire TV using the Flirc USB comes into play. When setting up the Flirc adapter you are able to configure the USB dongle and learn the IR codes that you would like to use to control your Fire TV with the downloadable Flirc configuration software. The Flirc dongle and software together learn the IR codes from any remote and allow them to control the functions of the Fire TV which are set one at a time.  Once the setup has bee...
Keep reading

RTI and Amazon Alexa Voice Control Integration Driver

Image
The new driver from MyDevice  is now available on their website to integrate Amazon Alexa voice commands with system macros on an RTI smart home control system. The new driver allows you to use the Amazon Echo, Dot, Tap and Fire TV product to trigger events based on your voice commands. The voice actions that can be integrated with this driver are on, off, up, down, raise, lower, brighten and dim. Each voice trigger is given a unique name usually room location based to trigger the macros that are specified within your RTI system programming. The driver is purchased and downloaded for $100 but a free demo driver is available for download to test out this great new control driver from  MyDevice . "Alexa, turn on the bedroom lights" My Device RTI Amazon Alexa Driver Download
Keep reading